FixVault
Home › Ford › 1997 › Taurus G, AX4S › Repair and Diagnosis (Single Page) › Transmission › Automatic Trans › Diagnosis - Ax4S Automatic Transmission › Code Reference Chart

Code Reference Chart

NOTE: Only transaxle-related trouble codes are listed. For engine-related DTC definitions, see TROUBLE CODE DEFINITIONS article in APPLICATIONS & IDENTIFICATION section. For engine-related DTC diagnosis, see appropriate SELF-DIAGNOSTICS article in ENGINE PERFORMANCE Section. These DTCs pertain to engine performance and must be repaired first, as engine performance and related component signals will affect transaxle operation and diagnosis.
CODE REFERENCE

Fault Code (1) Code Definition Pinpoint Test
P0705 Digital TR Sensor Failure 1997 D 
1998 Sable & Taurus D 
P0707 TR Sensor Circuit Shorted 1997 D 
1998 Sable & Taurus D 
P0708 TR Sensor Circuit Open 1997 D 
1998 Sable & Taurus D 
P0712 TFT Sensor Circuit Shorted B 
P0713 TFT Sensor Circuit Open B 
P0715 Insufficient Input From TSS F 
P0731 No 1st Gear A 
P0732 No 2nd Gear A 
P0733 No 3rd Gear A 
P0734 No 4th Gear A 
P0741 TCC Engagement Error C 
P0743 TCC Circuit Error C 
P0750 SS1 Solenoid Circuit Failure A 
P0751 SS1 Mechanical Or Hydraulic Solenoid Failure A 
P0755 SS2 Solenoid Circuit Failure A 
P0756 SS2 Mechanical Or Hydraulic Solenoid Failure A 
P0760 SS3 Solenoid Circuit Failure A 
P0761 SS3 Mechanical Or Hydraulic Solenoid Failure A 
P1700 AX4S Mechanical Failure (2)
P1702 Digital TR Sensor Intermittent Circuit 1997 D 
1998 Sable & Taurus D 
P1705 TR Not In Park 1997 D 
1998 Sable & Taurus D 
P1710 TFT Out Of Range (Mid) B 
P1711 TFT Out Of Range B 
P1713 TFT Out Of Range (Low) B 
P1718 TFT Out Of Range (High) B 
P1714 SS1 Mechanical Or Hydraulic Solenoid Failure H 
P1715 SS2 Mechanical Or Hydraulic Solenoid Failure H 
P1716 SS3 Mechanical Or Hydraulic Solenoid Failure H 
P1740 TCC Mechanical Or Hydraulic Solenoid Failure H 
P1741 TCC Continuous Slip C 
P1742 TCC Solenoid Failed (Calif.) C 
P1743 TCC Solenoid Failed (Calif.) C 
P1744 TCC Excessive Slip (Calif.) C 
P1746 Open PCM Output Driver E 
P1747 EPC Solenoid Circuit Failure E 
P1751 SS1 Mechanical Or Hydraulic Solenoid Failure A 
P1756 SS2 Mechanical Or Hydraulic Solenoid Failure A 
P1760 EPC Solenoid Circuit Failure E 
P1761 SS3 Mechanical Or Hydraulic Solenoid Failure A 
P1767 TCC Circuit Error C 
P1783 Transmission Overtemp B 
P1784 Mechanical Failure (1st/R) (2)
P1901 TSS Intermittent Signal F 
(1) Only engine performance fault codes that may affect transmission operation are listed. For complete list of engine performance fault codes, see appropriate SELF-DIAGNOSTICS article in ENGINE PERFORMANCE section.
(2) Causes for DTC to set are a low one-way clutch failure or low fluid level. Refer to TROUBLE SHOOTING in Ford AX4S Overhaul article and diagnose by symptom.
About FixVault