FixVault
Home › Ford › 1998 › Windstar Base, 3.8 4 › Repair and Diagnosis › Body & Frame › Door Locks › Remote Keyless Entry System › Diagnostic Trouble Code Testing › Test B1341: Power Door Unlock Circuit Shorted

Test B1341: Power Door Unlock Circuit Shorted

  1. Check PID DD_LOCK  - Select RAP module PID DD_LOCK. If PID DD_LOCK reads UNLOCK, go to step 3). If it does not read UNLOCK, go to next step.
  2. Check Driver Door Lock Switch Input  - Read RAP module PID DD_LOCK. Press driver door lock switch to UNLOCK position. If PID DR_LOCK changes to UNLOCK, replace RAP module. See REMOVAL & INSTALLATION  . Restore and retest system. If it does not read UNLOCK, repair open in Pink/Yellow wire circuit. Restore and retest system.
  3. Check GEM PID DR_UNLK  - Select GEM PID DR_UNLK. If GEM PID DR_UNLK reads SHORTGND, see DOOR LOCKS - POWER article. If it does not read SHORTGND, go to next step.
  4. Check Pink/Yellow Wire Circuit For Short  - Disconnect RAP module connector, located beneath instrument panel. With an ohmmeter, measure resistance of Pink/Light Green wire circuit between RAP module connector and ground. If resistance is less than 10 k/ohms, repair short in Pink/Yellow wire circuit. Restore and retest system. If resistance is more than 10 k/ohms, replace RAP module. See REMOVAL & INSTALLATION  . Restore and retest system.
About FixVault