Power Window Single Switch
Remove single switch from vehicle. See POWER WINDOW SWITCH under REMOVAL & INSTALLATION. Check for continuity between specified terminals while operating switch. See SINGLE SWITCH TESTING table. See Fig 1 . Replace switch if continuity between specified terminals does not exist. DO NOT check for continuity between terminals not specified.
SINGLE SWITCH TESTING
| Switch Position | Continuity Between Terminals No. |
|---|---|
| Neutral | 1 & 2; 4 & 5 |
| Up | 1 & 3; 4 & 5 |
| Down | 3 & 5; 1 & 2 |