Removal and Installation

WARNING: This page is about a different car, the 2003 Ford Windstar. However, it is still accessible from the selected car via links, so may be relevant.

Remove the accelerator cable (9A758) from the accelerator pedal and shaft (9725).

Fig 1: Removing Accelerator Cable From Accelerator Pedal And Shaft
Courtesy of FORD MOTOR CO.
Depress the tabs on the accelerator pedal retaining pin and remove the pin. Remove the accelerator pedal.

Fig 2: Removing Accelerator Pedal
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.