FixVault

PID/Data Monitor & Record

WARNING: This page is about a different car, the 2002 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. PID/Data Monitor and Record option allows technician, using scan tool, to read the state of several Parameter IDs (PIDs) to aid in diagnosing the system.
  2. Connect scan tool to Data Link Connector (DLC), located under instrument panel to right of steering column. Turn ignition switch to RUN position. Follow manufacturer's instructions for scan tool being used. PIDs are continuously updated on scan tool display.
DIAGNOSTIC SYMPTOMS

Condition Go To Test
AIR BAG warning light on continuously TEST A 
Audible tone/DTCs retrieved TEST Q  or TEST R 
No communication with RCM TEST Y 
DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION

Fault Code/Flash Code Go To Test
B1231/19 (1)
B1318/(2) (3)
B1342 (4)
B1869(5) TEST Q 
B1870(5) TEST R 
B1871/25 TEST L 
B1877/46 TEST S 
B1878/17 TEST U 
B1879/17 TEST V 
B1881/47 TEST T 
B1882/18 TEST W 
B1883/18 TEST X 
B1884/27 TEST M 
B1885/46 TEST S 
B1886/47 TEST T 
B1887/15 TEST D 
B1888/16 TEST F 
B1890/27 TEST N 
B1891/(2) TEST P 
B1892/(2) TEST O 
B1916/15 TEST E 
B1921/21 TEST B 
B1925/16 TEST G 
B1932/32 TEST H 
B1933/33 TEST I 
B1934/34 TEST J 
B1935/35 TEST K 
C1414/29 TEST C 
(1) Crash data memory full. Replace RCM.
(2) Flash code is not available.
(3) Battery voltage is low. Ensure battery voltage is above 9 volts. If battery voltage is below 9 volts, diagnose battery or charging system malfunction.
(4) RCM internal fault. Replace RCM.
(5) Tone will sound only if additional DTCs are present.