Passenger-Side Air Bag Module: Installation
WARNING: This page is about a different car, the 2002 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
- To install, reverse removal procedure. Tighten air bag module mounting bolts to specification. See TORQUE SPECIFICATIONS . Remove air bag simulator from passenger-side air bag module harness connector and reconnect connectors.
- Connect negative battery cable. With air bag simulators installed at all remaining deployable devices, perform system operation check. See SYSTEM OPERATION CHECK . Activate air bag system. See ACTIVATING SYSTEM under DISABLING & ACTIVATING AIR BAG SYSTEM.