FixVault
Home › Ford › 2000 › Contour SVT › Repair and Diagnosis › External Pages › Different car › Section 1137 (Parking Aid System) › Removal And Installation › Parking Aid Module › Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Mercury Montego, 2005 Ford Freestyle, and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.

    Sedan 

  1. Remove the package tray trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .

    2. Wagon 

  2. Remove the LH C-pillar trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .

    3. All vehicles 

  3. Disconnect the parking aid speaker electrical connector.
  4. Disconnect the parking aid module electrical connector.
  5. Remove the 2 pin-type retainers and the parking aid module.
  6. To install, reverse the removal procedure.
About FixVault