FixVault
Home › Ford › 2000 › Contour SVT › Repair and Diagnosis › External Pages › Different car › Section 1225 (Handles, Locks, Latches And Entry Systems) › General Procedures › Autolock and Horn Chirp Programming › Using the Remote Keyless Entry (RKE) Keypad

Using the Remote Keyless Entry (RKE) Keypad

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Enter the 5-digit permanent entry code into the RKE keypad.
  2. Within 5 seconds of entering the code, press and hold the 7/8 button on the RKE keypad.
  3. Within 5 seconds of Step  2, and while holding the 7/8 button, press the 3/4 button on the RKE keypad and release it.
    4. NOTE: If the autolock is disabled, the horn will chirp once. If the autolock feature is enabled, the horn will chirp once shortly and then sound a second time with a longer sound of the horn once the above sequence is completed.
  4. Within 5 seconds of Step  3, release the 7/8 button on the RKE keypad.
About FixVault