Removal and Installation
WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the floor console finish panel.
- Pull upward from the front of the floor console finish panel to release the retainers.
- Remove the 4 screws and the console ash tray assembly.
- Disconnect the electrical connectors.
- Remove the center register panel.
- Disconnect the electrical connector.
- Remove the 4 screws and the audio unit/dual automatic temperature control (DATC) assembly.
- Disconnect the electrical connectors and the antenna cable.
- Remove the 6 screws and the audio unit from the bracket.
- To install, reverse the removal procedure.