Seat Control Switch
WARNING: This page is about a different car, the 2002 Lincoln Blackwood. However, it is still accessible from the selected car via links, so may be relevant.
Remove seat control switch. See SEAT CONTROL SWITCHES (INCLUDING TEMPERATURE CONTROL AND LUMBAR) under REMOVAL & INSTALLATION. Measure resistance between indicated seat control switch terminals with switch in appropriate position. See SEAT CONTROL SWITCH TEST table. See Figure. If resistance is not as specified, replace seat control switch.
SEAT CONTROL SWITCH TEST
| Switch Position | Measure Between Terminals No. | Ohms |
|---|---|---|
| Forward | 1 & 5; 3 & 7 | 5 Or Less |
| Rearward | 1 & 3; 5&7 | 5 Or Less |
| Front Down | 1 & 8; 2 & 7 | 5 Or Less |
| Front Up | 1 &2 ; 7 & 8 | 5 Or Less |
| Rear Down | 1 & 4; 6 & 7 | 5 Or Less |
| Rear Up | 1 & 6; 4 & 7 | 5 Or Less |