WDS Scan Tool
WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Follow this procedure if using a WDS scan tool.
- Identify the vehicle using the normal WDS process.
- Select the toolbox icon at the top of the screen.
- From the menu list at the left of the screen, select Module Programming and press the check box in the lower right corner.
- Select Programmable Parameter and press the check box in the lower right corner.
- Select Personality and press the check box in the lower right corner.
- Select Trailer Brake Control Module.
- Select Enabled and press the check box in the lower right corner.