FixVault
Home › Ford › 2000 › Contour SVT › Repair and Diagnosis › External Pages › Different car › Section 1695 (Parking Aid System) › Removal And Installation › Parking Aid Module › Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.

    Sedan 

  1. Remove the package tray trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .

    2. Wagon 

  2. Remove the LH C-pillar trim panel. For additional information, refer to REMOVAL AND INSTALLATION FIVE HUNDRED, MONTEGO or REMOVAL AND INSTALLATION FREESTYLE .

    3. All vehicles 

  3. If replacing the parking aid speaker only, proceed as follows:
    • Disconnect the parking aid speaker electrical connector.
    • Disengage the parking aid speaker clips.
    • Remove the parking aid speaker.
  4. If replacing the parking aid module, proceed as follows:
    • Disconnect the electrical connectors.
    • Remove the parking aid module push pins.
    • Remove the parking aid module.
  5. To install, reverse the removal procedure.
About FixVault