Chain Sprockets: Assembly

WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

Position the No. 16 reverse/overdrive ring gear bearing on the special tools.
- Position the bearing with the part number facing toward the handle of the special tool.

Fig 1: Positioning No 16 Reverse/Overdrive Ring Gear Bearing On Special Tools

Courtesy of FORD MOTOR CO.

NOTE: The identification stamping of the bearing goes to the outboard side of the reverse/overdrive ring gear.

Using the special tools, install the No. 16 reverse/overdrive ring gear bearing.

Fig 2: Installing No. 16 Reverse/Overdrive Ring Gear Bearing Using Special Tools

Courtesy of FORD MOTOR CO.

Position the No. 17 stator support bearing on the special tools.
- Position the bearing with the part number facing toward the handle of the special tool.

Fig 3: Positioning No 17 Stator Support Bearing On Special Tools

Courtesy of FORD MOTOR CO.

NOTE: The identification stamping of the bearing goes to the outboard side of the reverse/overdrive ring gear.

Using the special tools, install the No. 17 stator support bearing into the stator support sprocket.

Fig 4: Installing No. 17 Stator Support Bearing Into Stator Support Sprocket Using Special Tools

Courtesy of FORD MOTOR CO.