FixVault
Home › Ford › 2000 › Contour SVT › Repair and Diagnosis › External Pages › Different car › Section 2109 (Sunroof) › Removal And Installation › Roof Opening Panel Module › Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the headliner. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION article.
  2. Remove the roof opening panel module pin-type retainer and the roof opening panel module.
    • Disconnect the electrical connectors.
  3. To install, reverse the removal procedure.
About FixVault