Speaker Walk-Around Test
WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
- To enter the speaker walk-around test, simultaneously press the audio unit preset buttons 3 and 6.
- The speaker walk-around test stops at each speaker and applies sound to each speaker for about one to two seconds. Each speaker is tested and displayed on the audio unit in the following sequence: RF, LF, LR, RR and SUBWOOFER.
- To exit the speaker walk-around test, turn the ignition switch off, turn the audio unit off, or press preset button 1 for DIA.