FixVault
Home › Ford › 2000 › Contour SVT › Repair and Diagnosis › External Pages › Different car › Section 570 (Handles, Locks, Latches And Entry Systems) › General Procedures › Keyless Entry Keypad Code Programming

Keyless Entry Keypad Code Programming

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Enter the permanent factory keyless entry keypad code.
  2. Press the 1/2 button within 5 seconds to activate the programming mode. Holding the 1/2 button for more than 2 seconds after activation will erase the stored customer code. The existing code will not need to be erased to program new a code.
  3. Within 5 seconds, enter the new 5-digit keyless entry keypad code. The door locks will lock and unlock to confirm the new code is programmed.
About FixVault