FixVault

Driver-Side Window Switch

Remove driver-side window switch. See WINDOW SWITCHES  under REMOVAL & INSTALLATION. Check continuity between appropriate terminals at appropriate connector with switch in specified position. See DRIVER-SIDE WINDOW SWITCH TESTING (REGULAR & SUPER CAB)  or DRIVER-SIDE WINDOW SWITCH TESTING (CREW CAB & EXCURSION)  table. See Figure , Figure and Figure . If continuity is not as specified, replace switch.

DRIVER-SIDE WINDOW SWITCH TESTING (REGULAR & SUPER CAB)

Switch Position (1) Continuity Between Connector-Terminals No.
Neutral C510a-1 & C510a-4; C510a-2 & C510a-3, C511-3, C511-1, C511-2, C511-3
Left
Up C510a-3 & C510a-4
Down C510a-2 & C510a-4
Right
Up C511-2 & C510a-4
Down C511-1 & C510a-4
One-Touch Down Engaged C510a-4 & C510a-1
(1) There should be an open circuit with switch in all positions between C510a-4 and C511-3.
DRIVER-SIDE WINDOW SWITCH TESTING (CREW CAB & EXCURSION)

Switch Position (1) Continuity Between Connector-Terminals No.
Neutral C510a-2 & C510a-5; C510a-3 & C510a-4, C510a-6, C510a-7, C510b-2, C510b-4, C510b-5, C510b-6, C510b-7
Left Front
Up C510a-2 & C510a-6
Down C510a-2 & C510a-7
Right Front
Up C510a-2 & C510a-4
Down C510a-2 & C510a-3
Left Rear
Up C510a-2 & C510b-7
Down C510a-2 & C510b-6
Right Rear
Up C510a-2 & C510b-5
Down C510a-2 & C510b-4
Lock-Out Unlocked C510a-2 & C510b-3
One-Touch Down Engaged C510a-2 & C510a-5
(1) There should be an open circuit in all switch positions between C510a-2 and C510b-2.