FixVault

Cable Adjustment

WARNING: This page is about a different car, the 2001 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Make sure that the range selector lever is tight against the rearward overdrive stop.
  1. Place the transmission range selector lever in the overdrive position.
  2. Raise and support the vehicle.
  3. Loosen the manual control lever nut.
    Fig 1: Locating Manual Control Lever Nut
    G03853644
  4. Place the transmission manual control lever in the overdrive position.
  5. Tighten the nut on the manual control lever.
    Fig 2: Tightening Nut On Manual Control Lever
    G03853645