Register - Center: Removal

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

Remove the instrument cluster finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE article.
Remove the center finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE article.

NOTE: Use care not to damage the center finish panel.

Drill out the heat stakes on the register and remove the register.

Fig 1: Register Stakes

Courtesy of FORD MOTOR CO.

Remove the louver assembly.
- Use a screwdriver to pry out the louver assembly.

Fig 2: Louver Assembly

Courtesy of FORD MOTOR CO.