FixVault
Home › Ford › 2000 › ZX2 Automatic › Repair and Diagnosis › External Pages › Different car › Section 1110 (Handles, Locks, Latches And Entry Systems) › General Procedures › Autolock and Horn Chirp Programming › Autolock Programming Using the Keyless Entry Keypad Procedure (If Equipped)

Autolock Programming Using the Keyless Entry Keypad Procedure (If Equipped)

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition to the OFF position.
  2. Close all the doors, the liftgate and the liftgate glass.
  3. Enter the 5-digit permanent entry code on the keyless entry keypad.
  4. Within 5 seconds of entering the code, press and hold the 3/4 button on the keypad. While holding the 3/4 button, press the 7/8 button.
  5. Release the 7/8 button, then release the 3/4 button. The horn will chirp once to indicate autolock is disabled. If the horn chirps twice (chirp followed by a honk), the autolock feature has been enabled.
About FixVault