FixVault
Home › Ford › 2000 › ZX2 Automatic › Repair and Diagnosis › External Pages › Different car › Section 1110 (Handles, Locks, Latches And Entry Systems) › General Procedures › Keyless Entry Keypad Code Programming › Erasing the Personal Codes

Erasing the Personal Codes

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Enter the permanent factory keyless entry keypad code.
  2. Within 5 seconds, press the 1/2 button on the keypad and release.
  3. Within 5 seconds, press and hold the 1/2 button on the keypad for 2 seconds.
  4. All personal codes are now erased and only the permanent factory keyless entry keypad code will work.
About FixVault