FixVault
Home › Ford › 2000 › ZX2 Automatic › Repair and Diagnosis › External Pages › Different car › Section 1110 (Handles, Locks, Latches And Entry Systems) › General Procedures › Keyless Entry Keypad Code Programming › Programming a Personal Code

Programming a Personal Code

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Up to 3 personal codes can be programmed. Once there are 3 personal programmed codes, any attempt to program additional codes will be unsuccessful.
  1. Enter the permanent factory keyless entry keypad code.
  2. Within 5 seconds, press the 1/2 button on the keypad.
  3. Enter the new 5-digit personal keyless entry keypad code. Each number must be entered within 5 seconds of each other.
  4. The doors will lock then unlock to confirm the new code is programmed.
About FixVault