FixVault
Home › Ford › 2000 › ZX2 Automatic › Repair and Diagnosis › External Pages › Different car › Section 1110 (Handles, Locks, Latches And Entry Systems) › General Procedures › Stepped Unlock Programming

Stepped Unlock Programming

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the ignition switch in the OFF position, press the LOCK and UNLOCK buttons on the Remote Keyless Entry (RKE) transmitter simultaneously for 4 seconds.
    • The turn signals will flash twice to indicate the mode change.
  2. Repeat Step 1 to enable/disable the stepped unlocking feature.
About FixVault