FixVault
Home › Ford › 2000 › ZX2 Automatic › Repair and Diagnosis › External Pages › Different car › Section 1469 (Handles, Locks, Latches And Entry Systems) › General Procedures › Keyless Entry Keypad Code Programming › Erasing a Personal Entry Code

Erasing a Personal Entry Code

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Enter the factory set 5-digit keyless entry keypad code.
  2. Within 5 seconds, press the 1/2 button on the keypad and release.
  3. Within 5 seconds, press and hold the 1/2 button for 2 seconds.
  4. All personal codes are now erased and only the factory set 5-digit code works.
About FixVault