FixVault
Home › Ford › 2000 › ZX2 Standard › Repair and Diagnosis › External Pages › Different car › Section 1190 (Hydraulic Brake System Actuation) › General Procedures › Adjustable Pedal Indexing

Adjustable Pedal Indexing

WARNING: This page is about a different car, the 2005 Mercury Montego, 2005 Ford Freestyle, and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: The adjustable pedal system must be indexed whenever the brake pedal assembly or accelerator pedal assembly is repaired.
    NOTE: Make sure the electrical connector is connected to the adjustable pedal motor.
  1. Disconnect the adjustable pedal motor drive cable from the brake pedal drive.
  2. Operate the accelerator pedal to the full rearward position.
  3. Connect the adjustable pedal motor drive cable to the adjustable brake pedal drive.
  4. Operate the adjustable pedals to the full forward position.
  5. Disconnect the adjustable pedal motor drive cable form the adjustable brake pedal assembly.
  6. Operate the adjustable accelerator pedal to the full forward position.
  7. Connect the adjustable pedal motor drive cable to the adjustable brake pedal drive.
  8. Check that the brake and accelerator pedals can be fully adjusted forward and rearward.
About FixVault