Removal & Installation
WARNING: This page is about a different car, the 2002 Ford RV Cutaway, 2002 Ford Econoline, 2002 Ford E450 Super Duty, and 2002 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect negative battery cable. Remove air cleaner assembly. Remove accelerator control splash shield. Remove coolant recovery reservoir and position aside. Remove speed control servo bracket mounting bolts. Disconnect harness connector from speed control servo.
- Press locking tab, rotate speed control actuator cable cap and disconnect speed control servo cable. Remove speed control servo and bracket. Remove speed control servo from bracket. To install, reverse removal procedure.