FixVault
Home › Ford › 2000 › ZX2 Standard › Repair and Diagnosis › External Pages › Different car › Section 1719 (Front Disc Brake System) › Removal And Installation › Front Disc Brake Shield › Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the brake disc. For additional information, refer to BRAKE DISC  .
  2. Remove the 3 bolts and the brake disc shield.
    • To install, tighten to 11 N.m (8 lb-ft).
  3. To install, reverse the removal procedure.
About FixVault