Powertrain Control Module (PCM): Installation
WARNING: This page is about a different car, the 2006 Mercury Milan and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
- Install the PCM and the bolts.
- Tighten to 8 Nm (71 lb-in).
- Connect the 2 PCM electrical connectors.
- Install the battery tray. For additional information, refer to BATTERY, MOUNTING AND CABLES .
- Restore the module configuration. Carry out the module configuration restore steps of the Programmable Module Installation procedure. For additional information, refer to MODULE CONFIGURATION .
- Reprogram the passive anti-theft system (PATS). Carry out the Parameter Reset procedure. For additional information, refer to ANTI-THEFT - PATS .