4.2L Engine
WARNING: This page is about a different car, the 2003 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS (4.2L)
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Battery Cable Frame Ground Bolt | 9-11 (12-15) | |
| Camshaft Position Sensor Synchronizer Hold-Down Bolt | 18 (25) | |
| EGR Tube Nut | 30 (40) | |
| Engine Coolant Temperature Sensor | 15 (20) | |
| EVAP Canister Nut | 13 (18) | |
| Fuel Tank Skid Plate Bolts | 9-13 (12-18) | |
| Fuel Tank Strap Fasteners (Aft) | ||
| Bolts | 64-88 (87-119) | |
| Nuts | 56-75 (77-102) | |
| Fuel Tank Strap Fasteners (Middle) | 13-17 (18-23) | |
| Heated Oxygen Sensor | 34 (47) | |
| Knock Sensor | 15 (20) | |
| Spark Plugs | 11 (15) | |
| INCH Lbs. (N.m) | ||
| Battery Cable Nut | 80-106 (9-12) | |
| Camshaft Position Sensor Screws | 53 (6) | |
| Crankshaft Position Sensor Bolts | 62 (7) | |
| Cylinder Head Temperature Sensor | 89 (10) | |
| Differential Pressure Feedback EGR System Bolts/Nuts | 53 (6) | |
| EGR Vacuum Regulator Solenoid Bolts/Nuts | 53 (6) | |
| EGR Valve And Adaptor Assembly Bolts/Nut | 89 (10) | |
| EVAP Canister Purge Valve Nut | 80 (9) | |
| Fuel Injection Supply Manifold Bolts | 89 (10) | |
| Fuel Pressure Relief Valve Cap | 6 (.5) | |
| Fuel Pump Bolts | 71-89 (8-10) | |
| Idle Air Control Bolts | 89 (10) | |
| Ignition Coil Bolts | 53 (6) | |
| Intake Manifold Runner Control Module Bolts | 89 (10) | |
| Intake Manifold Spacer Assembly | ||
| Step 1 | 53 (6) | |
| Step 2 | 89 (10) | |
| Mass Airflow Sensor Nuts | 89 (10) | |
| Powertrain Control Module Connector Bolt | 53 (6) | |
| Powertrain Control Module Mounting Nuts | 35 (4) | |
| Throttle Body-To-Manifold Bolts | 89 (10) | |
| Throttle Position Sensor Screws | 27 (3) | |
| Upper Intake Manifold Bolt (4.2L) | ||
| Step 1 | 53 (6) | |
| Step 2 | 89 (10) | |