FixVault
Home › Ford › 2000 › ZX2 Standard › Repair and Diagnosis › External Pages › Different car › Section 1848 (Warning Devices) › General Procedures › Safety Belt Minder Deactivating/Activating › Preparation

Safety Belt Minder Deactivating/Activating: Preparation

WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply the parking brake before deactivating/activating the safety belt minder.
  2. Place the gear selector lever in PARK or NEUTRAL (manual transaxle).
  3. Place the ignition switch in the OFF position.
  4. Close all the vehicle doors.
  5. Unbuckle the driver and the front passenger safety belts.
About FixVault