FixVault
Home › Ford › 2000 › ZX2 Standard › Repair and Diagnosis › External Pages › Different car › Section 2149 (Warning System) › General Procedures › Belt-Minder® Deactivating/Activating › Preparation

Belt-Minder® Deactivating/Activating: Preparation

WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply the parking brake before deactivating/activating the belt minder.
  2. Place the gear selector lever in PARK or NEUTRAL (manual transaxle).
  3. Place the ignition switch in the OFF position.
  4. Close all the vehicle doors.
  5. Unbuckle the driver safety belt.
  6. Place the parking lamps/headlamps switch in the OFF position.
About FixVault