Pump - CII: Installation

WARNING: This page is about a different car, the 2003 Ford Windstar. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse the removal procedure.
1. Using the special tool, install a new seal on the power steering hose (3A719).
  
  Fig 1: Installing Seal On Power Steering Hose
  Courtesy of FORD MOTOR CO.
  
  Fig 2: Installing 2 Nuts And 1 Bolt (Torque Specifications)
  Courtesy of FORD MOTOR CO.
  
  Fig 3: Installing 3 Bolts (Torque Specifications)
  Courtesy of FORD MOTOR CO.
  
  Fig 4: Installing Pulley
  Courtesy of FORD MOTOR CO.
  
  Fig 5: Installing Power Steering Hoses (Torque Specifications)
  Courtesy of FORD MOTOR CO.
Fill the power steering system and inspect for leaks. For additional information, refer to STEERING SYSTEM-GENERAL INFORMATION .