Direct Clutch: Disassembly

WARNING: This page is about a different car, the 2002 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

Remove the direct clutch pressure, friction and steel plates.
1. Remove the retaining ring.
2. Remove the plates.
  
  Fig 1: Removing Direct Clutch Pressure, Friction And Steel Plates
  Courtesy of FORD MOTOR CO.
Using the special tool, remove the selective snap ring.

Fig 2: Removing Selective Snap Ring
Courtesy of FORD MOTOR CO.
Remove the direct clutch balance piston.

Fig 3: Removing Direct Clutch Balance Piston
Courtesy of FORD MOTOR CO.
Remove the direct clutch return spring.

Fig 4: Removing Direct Clutch Return Spring
Courtesy of FORD MOTOR CO.

CAUTION: If damage is found on the direct clutch piston seals, install a new direct clutch piston.

Fig 5: Removing And Inspecting Direct Clutch Piston

Courtesy of FORD MOTOR CO.

Remove and inspect the direct clutch piston.