Forward Clutch: Assembly

WARNING: This page is about a different car, the 2002 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

Soak the internal spline clutch plates in clean automatic transmission fluid for 15 minutes before assembly.
Inspect the forward clutch piston bore surfaces for nicks or scratches. Install a new balance piston if necessary.
Lubricate and install the forward clutch piston assembly.

Fig 1: Installing Forward Clutch Piston Assembly
Courtesy of FORD MOTOR CO.
Install the forward piston return spring.

Fig 2: Installing Forward Piston Return Spring
Courtesy of FORD MOTOR CO.
Lubricate and install the forward clutch balance piston.

Fig 3: Installing Forward Clutch Balance Piston
Courtesy of FORD MOTOR CO.
Using the special tool, install the forward clutch assembly in a suitable press.

Fig 4: Installing Forward Clutch Assembly
Courtesy of FORD MOTOR CO.
Using the special tool, install the forward clutch balance piston snap ring.

Fig 5: Installing Forward Clutch Balance Piston Snap Ring
Courtesy of FORD MOTOR CO.
Install the forward clutch pressure, friction and steel plates.
1. Install the plates.
2. Install the retaining ring.
  - Check the clearance. For additional information, refer to SPECIFICATIONS .
    
    Fig 6: Installing Forward Clutch Pressure, Friction And Steel Plates
    Courtesy of FORD MOTOR CO.