Drive Mode Procedure for TCC

WARNING: This page is about a different car, the 2004 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

Follow operating instructions from the NGS menu screen:

Select "Output State Control."
Select "Trans - Drive Mode."
Select "PIDs" to be monitored.
Monitor all selected PIDs during test.
Select "Parameters - TCC."
Select "ON" to turn TCC ON.
Press "SEND" to send command.
Select "OFF" to turn TCC OFF.
Press "SEND" to send command.
Select "XXX" to cancel at any time.
Press "SEND" to send command.