FixVault
Home › Ford › 2001 › Excursion 7.3 F, 4WD › Repair and Diagnosis › External Pages › Different car › Section 301 (Engine - 6.8L) › Disassembly And Assembly Of Subassemblies › Piston - Pin Connecting Rod, Floating Pin › Disassembly

Piston - Pin Connecting Rod, Floating Pin: Disassembly

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the clips.
    Fig 1: Removing Clips
    G01544998Courtesy of FORD MOTOR CO.
  2. Remove the piston pin from the piston and connecting rod assembly.
    Fig 2: Removing Piston Pin From Piston And Connecting Rod Assembly
    G01544999Courtesy of FORD MOTOR CO.
  3. Remove the connecting rod from the piston.
    Fig 3: Removing Connecting Rod From Piston
    G01545000Courtesy of FORD MOTOR CO.
  4. Clean and inspect the piston and connecting rod. Refer to ENGINE SYSTEM - GENERAL INFORMATION .
About FixVault