Power Window Adjust Switch
Remove suspect window switch. Check for continuity between specified terminals while operating switch in specified position. See SWITCH TESTING (RIGHT FRONT & RIGHT REAR) or SWITCH TESTING (LEFT REAR) table. If continuity is not as specified, replace switch. See Figure .
SWITCH TESTING (RIGHT FRONT & RIGHT REAR)
| Switch Position | Continuity Between Terminals No. |
|---|---|
| Neutral | 1 & 5; 2 & 6 |
| Up | 2 & 3 |
| Down | 3 & 5 |
SWITCH TESTING (LEFT REAR)
| Switch Position | Continuity Between Terminals No. |
|---|---|
| Neutral | 1 & 2; 5 & 6 |
| Up | 2 & 3 |
| Down | 3 & 5 |