Removal And Installation: Actuator: Removal

WARNING: This page is about a different car, the 2003 Ford Windstar. However, it is still accessible from the selected car via links, so may be relevant.

Remove the audio unit. For additional information, refer to AUDIO .
Remove the LH instrument panel insulator. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
Remove the electronic actuator.
1. Disconnect the connector.
2. Remove the screws.
3. Pull down to release the actuator shaft and remove the actuator.
  
  Fig 1: Removing Actuator
  Courtesy of FORD MOTOR CO.