FixVault
Home › Ford › 2001 › Mustang Base, 2D Convertible, Standard › Repair and Diagnosis › External Pages › Different car › Section 899 (Electronic Engine Control System) › Removal And Installation › Powertrain Control Module (PCM) › Removal

Powertrain Control Module (PCM): Removal

WARNING: This page is about a different car, the 2005 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Any PCM replacement will require that ALL customer keys are available to be programmed at the time of installation. PCM replacement DOES NOT require new keys.
  1. Retrieve the module configuration. Carry out the module configuration retrieval steps of the PROGRAMMABLE MODULE INSTALLATION procedure.
  2. Disconnect the battery ground cable. For additional information, refer to BATTERY DISCONNECT & CONNECT .
  3. Disconnect the 3 PCM electrical connectors.
  4. Remove the 2 bolts and the PCM.
About FixVault