FixVault
Home › Ford › 2001 › Taurus SEL › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Power Door Lock System & Remote Keyless Entry System › Programming › Keyless Entry Keypad

Keyless Entry Keypad

NOTE: Factory code is printed on owner's wallet card, located in glove compartment and on Generic Electronic Module (GEM).
NOTE: System only allows one personal code to be programmed. Any existing personal code will not need to be erased to program a new one.
  1. Enter permanent factory keyless entry keypad code. Press 1/2 button within five seconds to activate programming mode. Holding 1/2 button for more than two seconds after activation will erase the stored personal code.
  2. Within five seconds, enter new five-digit keyless entry keypad code. Power door locks will lock and unlock to confirm new code is programmed.
About FixVault