Module - Anti-Lock Brake Control: Removal

NOTE:
The ABS module mounts to the HCU on a bracket on L/H inner fender well in engine compartment.

Remove the hydraulic control unit (HCU).
Detach the bracket from the HCU.
1. Remove the bolts.
2. Detach the bracket from the HCU.
  
  Fig 1: Identifying HCU Bracket
  Courtesy of FORD MOTOR CO.
Remove the anti-lock brake control module.
1. Remove the screws.
2. Remove the anti-lock brake control module.
Fig 2: Removing Anti-Lock Brake Control Module
Courtesy of FORD MOTOR CO.