FixVault
Home › Ford › 2002 › Escape 2.0 B, FWD › Repair and Diagnosis › Engine Mechanical › Mechanical › Engine System-General Information › General Procedures › Connecting Rod - Large End Bore

Connecting Rod - Large End Bore

  1. Tighten the bolts to specification, then measure the bore in 2 directions. The difference is the connecting rod bore out-of-round. Verify the out-of-round is within specification.
    • For 2.0L Zetec engine procedure see appropriate section in ENGINE - 2.0L ZETEC . For 3.0L (4V) engine procedure see appropriate section in ENGINE - 3.0L (4V) .
    • If out of specification, install new components as necessary. For 2.0L Zetec engine procedure see appropriate section in ENGINE - 2.0L ZETEC . For 3.0L (4V) engine procedure see appropriate section in ENGINE - 3.0L (4V) .
    Fig 1: Measuring Bore In 2 Directions
    G03429558Courtesy of FORD MOTOR CO.
About FixVault