FixVault
Home › Ford › 2002 › Escape 3.0 1, 4WD › Repair and Diagnosis › Engine Mechanical › Mechanical › Engine System-General Information › General Procedures › Valve - Spring Squareness

Valve - Spring Squareness

  1. Measure the out-of-square on each valve spring.
    • Turn the valve spring and observe the space between the top of the valve spring and the square. Install a new valve spring if out of square. For 2.0L Zetec engine procedure see appropriate section in ENGINE - 2.0L ZETEC . For 3.0L (4V) engine procedure see appropriate section in ENGINE - 3.0L (4V) .
    Fig 1: Measuring Out-Of-Square On Valve Spring
    G03429580Courtesy of FORD MOTOR CO.
About FixVault