FixVault
Home › Ford › 2002 › Escape 3.0 1, 4WD › Repair and Diagnosis › Engine Mechanical › Mechanical › Engine System-General Information › General Procedures › Valve Spring Strength › Valve Spring Strength Procedure

Valve Spring Strength Procedure

  1. Use a Valve/Clutch Spring Pressure Gauge to check the valve spring for correct strength at the specified valve spring length.
    • For 2.0L Zetec engine procedure see appropriate section in ENGINE - 2.0L ZETEC . For 3.0L (4V) engine procedure see appropriate section in ENGINE - 3.0L (4V) .
    • If out of specification, install new components as necessary. For 2.0L Zetec engine procedure see appropriate section in ENGINE - 2.0L ZETEC . For 3.0L (4V) engine procedure see appropriate section in ENGINE - 3.0L (4V) .
    Fig 1: Checking Valve Spring
    G03429582Courtesy of FORD MOTOR CO.
About FixVault