FixVault
Home › Ford › 2002 › Escape 3.0 1, FWD › Repair and Diagnosis › Engine Mechanical › Mechanical › Engine System-General Information › General Procedures › Connecting Rod - Bushing Diameter

Connecting Rod - Bushing Diameter

  1. Measure the inner diameter of the connecting rod bushing, if equipped. Verify the diameter is within specification.
    • For 2.0L Zetec engine procedure see appropriate section in ENGINE - 2.0L ZETEC . For 3.0L (4V) engine procedure see appropriate section in ENGINE - 3.0L (4V) .
    • If out of specification, install new components as necessary. For 2.0L Zetec engine procedure see appropriate section in ENGINE - 2.0L ZETEC . For 3.0L (4V) engine procedure see appropriate section in ENGINE - 3.0L (4V) .
    Fig 1: Measuring Inner Diameter Of Connecting Rod
    G03429559Courtesy of FORD MOTOR CO.
About FixVault