FixVault
Home › Ford › 2002 › Excursion 7.3 F, RWD › Repair and Diagnosis › External Pages › Different car › Section 2001 (Cruise Control System) › Removal And Installation › Speed Control Switch › Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the speed control switch by pulling the switch toward the rear of the vehicle.
    • Disconnect the electrical connector.
  2. To install, reverse the removal procedure.
About FixVault