FixVault
Home › Ford › 2002 › Excursion 7.3 F, RWD › Repair and Diagnosis › External Pages › Different car › Section 719 (Fuel System-General Information) › General Procedures › Fuel Line Fittings - Push Connect › Disconnect

Fuel Line Fittings - Push Connect: Disconnect

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel-related component. Highly flammable mixtures are always present and can be ignited, resulting in possible personal injury.
WARNING: Fuel in the fuel system remains under high pressure even when the engine is not running. Before repairing or disconnecting any of the fuel lines or fuel system components, the fuel system pressure must be relieved to prevent accidental spraying of fuel, causing personal injury or a fire hazard.
  1. Release the fuel pressure. For additional information, refer to FUEL SYSTEM PRESSURE RELEASE - GASOLINE ENGINES  or FUEL SYSTEM PRESSURE RELEASE - DIESEL ENGINES .
  2. Disconnect the safety clip from the male hose.
    Fig 1: Removing Safety Clip
    G03909889Courtesy of FORD MOTOR CO.
  3. Install the fuel tube disconnect tool and push into the fitting.
    Fig 2: Installing Fuel Tube Disconnect Tool
    G03889764Courtesy of FORD MOTOR CO.
  4. Separate the fittings.
    • Inspect for damage.
    • Clean the fittings.
      Fig 3: Separating Fittings
      G03889765Courtesy of FORD MOTOR CO.
About FixVault