Driven Sprocket Support: Disassembly

WARNING: This page is about a different car, the 2002 Ford Windstar. However, it is still accessible from the selected car via links, so may be relevant.

Remove the Teflon® seal rings and the No. 5 thrust washer.

Fig 1: Removing Teflon Seal Rings And Thrust Washer
Courtesy of FORD MOTOR CO.

NOTE: If the driven sprocket bearing is damaged it should be replaced.

Fig 2: Removing Driven Sprocket Bearing

Courtesy of FORD MOTOR CO.

Using the special tools, remove the driven sprocket bearing.