Engine Cooling System

• Specifications
  • General Specifications
  • Torque Specifications
• Description And Operation
  • Engine Cooling
• Diagnosis And Testing
  • Engine Cooling
    • Special Tool(s)
    • Inspection and Verification
    • Symptom Chart
    • Pinpoint Tests
      • Pinpoint Test A: Loss Of Coolant
      • Pinpoint Test B: The Engine Overheats
      • Pinpoint Test C: The Engine Does Not Reach Normal Operating Temperature
    • Component Tests
      • Pressure Test - 3.8L
      • Pressure Test - 4.6L
      • Cap - 3.8L
      • Cap - 4.6L
    • Thermostat-Water
    • Thermostat-Electrical Test
    • Thermostat-Mechanical Test
    • Radiator Leak Test, Removed From the Vehicle
    • Fan-Electric Test
• General Procedures
  • Cooling System Draining, Filling and Bleeding
    • Special Tool(s)
    • Material
    • Draining
    • Filling and Bleeding with RADKITPLUS
    • Filling - 3.8L without RADKITPLUS
    • Filling - 4.6L (2V) without RADKITPLUS
    • Filling - Cobra without RADKITPLUS
    • Filling - Mach I without RADKITPLUS
    • Bleeding without RADKITPLUS
  • Engine and Radiator Flushing
  • Heater Core Backflushing
• Removal And Installation
  • Thermostat - 3.8L
    • Material
    • Removal and Installation
  • Thermostat - 4.6L(2V)
    • Material
    • Removal and Installation
  • Thermostat - 4.6L(4V)
    • Material
    • Removal and Installation
  • Bypass Tube - 3.8L
    • Material
    • Removal and Installation
  • Bypass Tube - 4.6L(4V)
    • Material
    • Removal and Installation
  • Water Pump - 3.8L
    • Material
    • Removal and Installation
  • Water Pump - 4.6L(2V) and 4.6L(4V)
    • Material
    • Removal and Installation
  • Radiator
    • Removal
    • Installation
  • Cooling Fan Motor and Shroud
    • Removal and Installation
  • Water Bypass Hose - 3.8L
    • Removal and Installation
  • Degas Bottle - 4.6L(2V) and 4.6L(4V)
    • Removal and Installation