Battery Cables: Removal

Disconnect the battery ground cable.

Fig 1: Disconnecting Battery Ground Cable
Courtesy of FORD MOTOR CO.
Disconnect the battery positive cable.

Fig 2: Disconnecting Battery Positive Cable
Courtesy of FORD MOTOR CO.
Remove the nut and disconnect the battery positive cable from the power distribution box.

Fig 3: Removing Nut And Disconnecting Battery Positive Cable
Courtesy of FORD MOTOR CO.
Remove the generator B+ stud nut and remove the cable harness eyelet.

Fig 4: Removing Generator B+ Stud Nut
Courtesy of FORD MOTOR CO.
Disconnect the generator battery sense circuit connector.

Fig 5: Disconnecting Generator Battery Sense Circuit Connector
Courtesy of FORD MOTOR CO.
Remove the pin-type retainers and remove the upper radiator support sight shield.

Fig 6: Removing Pin-Type Retainers
Courtesy of FORD MOTOR CO.
Remove the body negative ground cable bolt.

Fig 7: Removing Body Negative Ground Cable Bolt
Courtesy of FORD MOTOR CO.
Raise and support the vehicle.
Remove the battery cable harness retaining bracket nut. Remove the bracket and the engine negative ground cable from the stud.

Fig 8: Removing Battery Cable Harness Retaining Bracket Nut
Courtesy of FORD MOTOR CO.
Remove the battery cable harness from the harness bracket.

Fig 9: Removing Battery Cable Harness
Courtesy of FORD MOTOR CO.
Remove the starter motor solenoid terminal cover.

Fig 10: Removing Starter Motor Solenoid Terminal Cover
Courtesy of FORD MOTOR CO.
Remove the starter motor positive cable nut and disconnect the B+ cable. Remove the battery cable harness assembly from the vehicle.

Fig 11: Removing Starter Motor Positive Cable Nut
Courtesy of FORD MOTOR CO.